LAG EQUIPMENT
LAG-2800
Industrial tear-out machine designed around the latest technology and built on the idea of safety comes first.
Leading the industry in innovation, design, reliability and power.
Introducing LAG Equipment’s LAG-2800 refractory tear-out machine. Taking decades of experience and knowledge, LAG Equipment has developed a machine that looks at safety first. From the ground up, innovation and design are the foremost thoughts while keeping safety in mind. Using the latest technology, the machine was designed to work effortlessly tearing out refractory or cleaning out a vessel while allowing the operator to keep a safe distance.
From the undercarriage to the boom, the LAG-2800 is built entirely from heavy gauge steel plate allowing the machine to utilize high-impact hydraulic hammers and various attachments. The pivoting roller boom design gives the LAG-2800 the ability to reach areas effortlessly that typical excavator booms cannot touch. Utilizing safety perimeter lighting and controlled by a radio control pendant only, the operator is kept at a safe distance.
Utilizing an array of smart cameras, the safety of the operator and the personnel near the machine is increased through detection zones around the machine. As an operator or personnel approaches the machine, the smart cameras detect them and will slow the machine down first, then as they move closer to the tracks of the machine, the cameras will halt the tracks and limit other functions of the machine to ensure the operator and personnel's safety.
Many of the key design and innovations the LAG-2800
A personnel detection system, utilizing six shielded cameras, or a tag proximity detection system, utilizing a operator equipped tag, warns the operator that they are within a dangerous operating zone. Functions slow and stop to keep the operator safe.
Reduced structural fatigue through FEA analysis. Center of mass over undercarriage. Lifting balance centered to machine. Optimized diesel engine (limited regen). Proprietary designed slew drive. Shielded deck components.
No-spill fill. Bottom fill eliminates fall protection. Certified pressure tested.
No-spill fill. Certified pressure tested.
High pressure / low flow proportional system. Active kidney loop cooling system. Integrated counterbalance valves on cylinders. ​
One radio system, choice from three different joystick control layouts. No tethered control pendant.
High pressure / low flow motor. Narrow track profile. D-rings for safe tie-down.
Curtain lights provide the operator a safe distance to work.
LAG-2800's boom out and tool down ready for work.
The LAG-2800 using one of it's many attachments, scraping out an aluminum crucible.
LAG-2800 moving into position to clean out torpedo ladle.
LAG-2800's boom out and tool down ready for work.